Selection Of Jig Heads for Zander

Selection of Jig Heads for Zander - They come in different shapes, weight and size. But the main thing is powerful and sharp hook. This is necessary to break through the firm jaw of the zander. Otherwise there will only be useless bites.

How To Selection Of Jig Head

Image of Selection Of Jig Heads for Zander



Jig heads can have from one to three hooks. As a rule, a single hook is sufficient. Fishing fans usually prefer a round jig head (ball) with dark color. Weight is selected in relation to the depth of fishing:
  • Depth up to two meters - jigs from 2 to 8 grams;
  • Depth of two to four meters - jigs from 5 to 10 grams;
  • Depth of four to six meters - jigs from 10 to 12 grams;
  • The depth is over six meters - jigs from 12 to 18 grams.


Search For Fish And Fishing Technique For Zander
If the bottom of the pond is familiar, then we must first examine the bays, pits, canals connected to the river and the deep floods. These are possible parking spaces or the course of the zander. Jig baits require special wiring to create a game that attracts fish. There are different types of jigging:
  • Kicked (classic) jigging. The wiring is fast and takes place via a coil. After touching the bait starts the wiring, you need to make 2 to 7 revolutions with a coil. Next - a pause of 5 seconds. This process must take until the shore. The attack takes place during the break. 
  • Slow wiring. It's similar to classic, but curves are much slower. The bait for this cabling should be with a head of 7-8 grams.


Catch a Zander At Night And At Different Seasons


Image of Catch a Zander At Night And At Different Seasons


Zander is very active at night. The catch of zander at this time of day was successful on all reservoirs and reservoirs. The biggest activity is after sunset and until midnight. It is important to think about Zander in front of the hunting area, during the day you can do educational work and at night you can only fish.

The fishing spots remain unchanged for several years. This is a permanent pilgrimage route. The sensitive spinning with a braided cord is ideal for night fishing. In the dark, it will rely only on the tactile sensations of the rigging.

Jig bait for night fishing of zander is required to choose a bright color. Excellent bait, covered with a fluorescent layer that glows at night. This appearance is noticed and zander. Watch a video in which you catch a zander on a clamping device at night.

Fishing in different periods of the year has its own differences:
  • In spring, when you catch zander, it is necessary to correctly contact the choice of fishing spot. And then the fish aggressively attacks every bait. In spring, Zander likes to make parking spaces at the bottom of the water and on the hills. Often in jig fishing, its fragility also occurs.
  • In summer, zanders can be found in those parts of the reservoirs where the water is clean and enriched with oxygen. Allows robbers to ambush in shady places, in pools and pits, as well as under driftwood. In summer, you can use foaming fish equipped with a small and light lowering body.
  • In autumn, zander should be searched in deep sections of rivers and reservoirs. During this time, jig lures with heavy heads are needed. Polyurethane foams and foamy fish are an excellent choice for zander fishing. The optimal time for fishing is mid and late October.


Jig Rig Rigging


Image of Jig Rig Rigging





This jig fishing device is new. But there is nothing unusual or special. The sinker has conical elongated shape. The offset hook is attached to it by two winding rings on which the silicone lure rests. The construction is fast moving, it can easily pierce a layer of grass. This allows it to be constantly at the bottom or close to it at a sufficiently deep depth. With this design, you can catch zander on a stony ground and in the grass.

Features of Rig Rigging:

  • Excellent flies. In windy weather, it is not difficult to throw a voluminous bait very far away;
  • New animates the bait made of silicone. High effect results in a low-noise silicone (without antennas and tails). They are worms, crabs;
  • Excellent equipment can work with floating baits and baits that have no vibrating elements;
  • Allows bait in one place;
  • Can hook the hook areas in combination with offset hooks: a ram knife, a rock bottom and dense grass.


How To Make a Drilling Rig Yourself



Image of How To Make a Drilling Rig Yourself


The snap-in can be done on its own. A lead sinker will be used for poser fishing. In it it is necessary to insert the noose from the steel and clamp tightly. Then attach 2 ring to the loop. Attach a double or single hook to the ring, which is used for fishing in clean places. On them and serve a bait made of silicone.

Weight sinks, hook size can be arbitrary. Consider the density of vegetation, depth, and expected prey. You can use the factory boards with an elongated shape or in the form of a cutting cone. Suitable and brick-like boards used on donkeys for calm fish.

Jig Rig Rigging requires careful selection of the bait. If you notice that the fish is not picking, you should change the bait. You can try any bait: and simple worms and vibro worms and volumetric sailing. Change the bait to change the lock effect and the sound you create. Often the bait change even leads to a bite in a protected place.

Jig is considered a fairly effective way to catch zander. It is due to the fact that the fish bait is carried out on the ground. This allows the fisherman to count on the plentiful catch of zander. But having a good catch on a regular basis is only possible if the spinning equipment is properly equipped according to the selected places for fishing and jig baiting.

Sudak - the largest representative of Perciden, lives in many lakes and rivers in our country. Its maximum weight reaches twenty kilograms. Fishermen consider it a great success to catch a zander within ten kilograms, although smaller individuals are quite recognizable trophies. This predatory underwater dweller eats most intensely at dawn.

Fishing for zander is considered more frequently than other spinning fishing methods. This popularity is explained by the benthic way of life of the prey. Heavy or medium-sized lead drill heads perfectly reach the ground, with graduated wiring that makes it possible to catch mainly in the lower layers, thereby attacking the predator.

Properties


Image of Selection Of Jig Heads for Zander


Experienced fishermen are sure that it is most promising and effective to catch a zander on a device. It can be regarded as an exciting underwater hunt in a "light version": in fact, special suits or pneumatic rifles are not required for this type of fishing. 

Knowing how to catch a zander bar, a person can be sure: without prey, he will not return home. A special feature of this method is a special technique for casting spinning baits when it needs to be carried by intermittent movements on the ground. The bait is chosen as natural - a small dead fish and artificial - a variety of silicone worms, twisters, etc. Another distinguishing feature is the presence of a special lead jig head on a zander - the weight in which the hook is attached.

Belum ada Komentar untuk "Selection Of Jig Heads for Zander"

Posting Komentar

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel