Search For A Place To Fish

Search for a place to fish - The predictability of the plots in this case is related to the uneven terrain of the given reservoir. Zander's favorite places are the entrances and exits of hot tubs and deep pits, dumps and various sinks. This fish likes to hide behind an inflatable boat, underwater islands or driftwood.

How To Find A Place To Fish

To look for a similar spot, many anglers use a jighead for zander without hooks. At the time for which they reach the ground, experienced anglers can easily calculate the depth, and after some turns of the coil and once again waiting for the free fall of the lower bodies to the bottom, they can also determine the differences.

In rivers, when they slowly enter the riverbed but the water is still high, the estuaries of the tributaries and their "outflows" are of particular interest for fishing. In the last zander it is worth a tenth to roll a little thing along the streams. Many other carnivorous fish also turn around here, so it is possible that a pike or perch can enter the device.

In such places, the catch of a zander can be continued on a device around the clock: potential prey practically does not leave the areas of its feast. No less catching and flooded shorepiles. In general, this fish loves areas where the shore is transparent in the water and there are clay blocks on the ground.

On the river you have to look for the water - the place where the current is opposite. Here this robber gathers without much effort to hunt. When the rivers fully enter the banks, the previously catching "exits" begin to empty in them. That's why the fishermen put the jig bait on the zander in mid-June and almost to the end and switch to other equipment. 

Fishing Techniques

Many specialize exclusively in this type of fishing. Catch of Zander On a clamping device, a separate direction is estimated today in spinning mode and therefore requires certain abilities. For its success and effectiveness, the following components must match:

competently assembled device :

• a rich selection of baits and jigheads;
• a good place;
• accompanying weather;
• ground ability to implement wiring.

The technique of catching a zander on a jig is as follows: after throwing a spinning rod with a jig head and a curled bait, the fisherman waits until he reaches the ground and slowly begins to pull the fishing line. After making two turns of the coil, he must pause to make the bait appear on the ground and repeat his actions.

The biting takes place during the standstill of the movement while one waits for the bait to fall on the underwater floor. The main condition is that the bait has a "contact" with the ground to interest the predator. And the rest is a matter of habit and experimentation.

You can make a few turns of the coil and then wait for a break - until the ground is completely touched by the bait and you can play with the rod. Some anglers prefer to "lead" the bait slowly. This contribution often ends with success.

Boating From a Boat

Zanders from the boat should try to catch over the streams, carrying the bait towards the shallows to the depths, so that the ground is felt better. It is necessary, if possible, to achieve a uniform rhythm with graduated cabling, so that paused free fall were about a second or two.

Any suspicion of biting requires you to cut it off short but safe. When fishing from the boat, one must also take into account the influence of the current. So if you can't fish exactly over the pivot point, you should try to bait at least along the radius to comb for casting for casting. 

Tackle

A zander that moves from the shore during a long throw on a drilling table is caught on a two-and-a-half to three-and-a-half meter long "stock". If you fish from a boat, long throws are not necessary, so it is much more convenient to keep the rods shorter. Long spinning also makes it possible to avoid hooks on the shore, and they go through painlessly.

As far as the system is concerned, each fisherman has his own preferences for this characteristic of rods. Some prefer to catch hard and fast "sticks", others believe that it will be more convenient with a rod with a semi-parabolic system.

"Viscous" varieties of rods work well for zander, which reduces the number of meetings to a minimum. In addition, the spinners throw the bait much further with such a system. In addition, they can replace the heavy pretensioner with lighter turntables or wobblers if required. The spinning test should be selected according to the fishing conditions. If you are fishing on a standing pond from a boat, the rod with a load of five to forty grams is very suitable. And for fishing on the river, where there is a strong current and great depth, spinning with a test characteristic of up to sixty is perfect.

To Wash

To catch Zander on Jig was effective, no less important role along with the rod is played by another component of the tackle. This coil, the quality and operating parameters of which depend on the sensitivity of the fishing rod. This is especially important if you catch a zander on a device at night or at dusk. Many anglers believe that it is better to save on spinning rods, but to choose the coil, a strong and good. The sizes 2500-3000 are best suited. Catching a zander in one night is more effective if you use a multiplier.

Leska

A mandatory attribute of tackle for this type of fishing is braided line, which significantly increases the sensitivity of spinning at long distances. The absence of strain on the cord has a very beneficial effect on the effectiveness of the sweeps. Since the pliers cheeks are quite stiff, they can only be pierced by powerful movements with large amplitude.

Tools

When anglers catch zander, they use several jig rigs. In case of hard assembly, the bait is attached to the head with the crocheted hook. Excellent cuts the jaws of these fanged Predator Twister or Vibrotails with active play. 

When using a movable suspension, the baits are attached to the offset or individual hooks, as well as to a double or T-piece and with the help of rings to the "Cheburashka" - long-eared lower-body. Due to the mobility of the device for catching zander, foam or polyurethane fish as well as rubber bands which do not have their own game can be used.

In hard-to-reach areas, the fisherman is helped by diverting the lines. Such equipment carries a bait with a sink that allows the device to touch the ground, and a twister or vibrotail - to float freely over it. Length deflection wiser should reach one hundred and twenty centimeters. This option attaches the lowerbody to the main line.

Jigging Weight

Anglers on zander should have a variety of weights. Sometimes only one gram of weight affects whether there is a good bite or whether a person expects a complete fiasco. Jig heads are selected, which immediately assume several factors - the depth, strength of the flow, the shape and size of the bait and the seasonal activity of the zander. For practical reasons, it is better to use a mobile installation of a tool with a Cheburashka for frequent weight changes.

Autumn fishing

It has been captured this season, according to experienced anglers. Pike perk in autumn on a jig is caught from the second decade of September, when he has a brutal appetite. The activity of fish is increasing at this time of year.

Jig from the boat for this time becomes the most productive device, because the zander starts very quickly to move through the huge water area of the reservoir. The waiting technique for catching zander therefore does not produce the desired results in autumn.

In mid-September you can safely go to night fishing: during this time it is always successful. Not everyone knows that at this time of day it is that the zander gets perfectly caught in a jigbell. This is due to the fact that the fish gradually begins to move to the place of hibernation - a deep place in the pond where this fishing equipment is relevant.

The actual Zhor of this river predator begins closer to October before freezing. It takes about a month. Hard-boiled anglers know that if they find the places where Zander lives this month, the prey will be very rich. But in mid-November, the bites of the fish begin to eased.

Catching predatory fish is very exciting at any time of the year. The most common way to catch this predator is spinning from various artificial baits. Jigging Zander can not only catch this fish effectively under different conditions, but also allows you to get many positive emotions from this hobby. 

Zander, is a predatory fish and has a considerable resistance to Vyvazhivanii. Fishing on pike and pike requires not only a high level of training for anglers, but also the selection of high-quality fishing gear. Secrets of Walleye Jig Catch are the gearbox to choose to cope with a heavy load, but it won't be too cumbersome and will allow for the bait in the water to attract the attention of a hungry predator. To catch zander on a jig you need to buy:

• Rod - Lightweight carbon product with a length of not less than 4 meters from the shore. When you catch a zander on a jig from the coast, you often need long bait. A short form of such a task cannot be performed, and therefore one should choose a "stock" with such a length. The fishing of zander on a device of a boat is carried out on the contrary, when using a rod of short length. In this case, enough "stock" length of 2.1 meters, and if necessary to catch the far away sector of the reservoir, you can easily swim directly to the place of predatory fishing. The test of the rod should be small, because of the use of small baits. Typically, experienced fishermen choose shapes with a test of 10 to 30 G. In this case, you can successfully catch this predator as a small "chewing gum" and with a greater lead load. The design of the fishing rod for zander fishing should be fast, so that even a slight deviation in the movement of the bait during wiring is transferred to its whip.

• Coil. This detail should not be a "weak link" in a well-functioning fishing gear. Most often, a braided cord with a small diameter is used to catch this fish, so that the size of the coil is not even too large. A coil of 3000 - 4000 is ideal for fishing zander. The product must be equipped with high-quality ball bearings in a quantity of no less than 6 pieces. In this case, you can rely on the smooth running of the mechanism, which has a positive effect on the comfort of the equipment and increases the overall durability.

• Leska. When fishing on zander used tires with a small ogruzkoy jig, so that the bait is not easy demolition passage, and on the other casting air resistance exerted on it to approach a minimum value, applied braided cord diameter of not more than 0.25 mm. With the skilful handling of tacklers, even with a trophy zander, a quality cord of this diameter will cope with the jerking of the fish.

• Sinker. To catch zander in this way, jigheads are used, in which the hook is soldered into a piece of lead. This technical solution makes it possible to combine the charging of the fishing gear with the hook, which significantly increases the possibility of controlling such a bait when performing the wiring. Sometimes a "Cheburashka" is used to catch a jig. This type of senk lead consists of a round lead ball with a ring for attaching the cord and a carabiner for the hook. The use of Cheburashka makes it possible to replace the hook at any time if it is damaged or otherwise, making this equipment more versatile.

• Rubber lure has a large number of different models that differ in size, color and quality of the material. The greatest popularity among fishermen enjoys edible rubber for zander. Eatable baits for predatory fish catches allow a much larger snap due to the use of special lures, which are part of the material made from the swirling encoder or soft plastic bait.

Bagikan Artikel ini